Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs
(610 reviews)
Price: $12.31
In Stock
Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs
Item # PS1400700340
Retail:$21.09
Our Price: $12.31
You Save: 42%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (610)
- Q & A (0)
- Videos (2)
- Photos
Pro Series Accessories and Parts - PS1400700340
- Camper Jacks
- Trailer Jack
- Jack Foot
- Pro Series
- 2 Inch Diameter Tubing
Removable, corrosion-resistant footplate fits jacks with 2" diameter tubing and is rated up to 5,000 lbs.
Features:
- Footplate detaches easily
- Corrosion-resistant zinc finish
- Pin included
Specs:
- Fits: jacks with 2" diameter tubing
- Height: 2"
- Capacity: 5,000 lbs
- Limited 1-year warranty
1400700340 Foot Plate with Pin - 5,000 lbs
1400700327 Fulton Removable Footplate and Pin Assembly
California residents: click here
Video of Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Pro Series Detachable Footplate Review
Today we're going to be taking a look at the pro-series detachable foot plate, designed for use with two and quarter inch main tube jacks. Part number on it is PS1400700340. Now as you can see, we've got an included pin here, this is going to securely attach the foot plate to the bottom of our jack. The whole diameter here inside to inside is about two inches. This is going to be designed to fit the jacks so they have the two and a quarter inch main tube and the two-inch tube that comes out of those. The main body of our foot plate measures about three and three quarters of an inch wide and we've got about seven and a half inches in width. Now attachment to your trailer couldn't be easier.
What we do is just bring it down underneath our main shank, slide it into position, we'll lift up on it, and then slide through our pin. Now with that just the steel tube that comes out we've been having issues with this just digging down into the gravel a little bit and causing us some headaches so our foot-pack design here is going to help to dissipate that and spread that weight out to give us more upward pushing force. They've designed it with a Zinc construction, so that's going to help to prevent the rust and corrosion as we go down the road. As you can see with it installed, it's just a matter of letting your jack do the work now. As you can see there, we've got a nice sturdy fit. Our foot-packI's not going anywhere.
We could keep lifting it up but I don't feel like wasting your time with that, so go ahead and just lower it back down. This is going to be fully detachable, if you decide that you don't want the noise or don't want it attached as your going down the road. We can leave it connected just as you see there, but simply by just removing that pin and raising our tube up high enough we'll be able to take it right back off. So there you go guys, that's today's look at the pro-series detachable footplate for two and quarter inch main tube or two inch down tube jacks. Part number on it is PS1400700340. .
Customer Satisfaction Score:
100% were satisfied with this product
0% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs - PS1400700340
Average Customer Rating: 4.8 out of 5 stars (610 Customer Reviews)
Removable, corrosion-resistant footplate fits jacks with 2" diameter tubing and is rated up to 5,000 lbs.by: Richard 05/24/2024
Decent foot plate but it didn’t come with a connector pin.
by: Glenn11/22/2023
Fit very nice, prevents damage to my jack shaft. Wide foot supports the weight of the trailer.
by: Dean 03/08/2024
Hard to find locally, quick and easy from etrailer
by: Happy Camper III05/08/2024
The footplate is a perfect fit for the jack, and is large enough to provide a stable footing. I am using it on a Rockwood 25 ft Travel Trailer. After having an electric jack that failed too soon, I am glade to return to a manual jack.
by: T0CAS1805/26/2024
Looks and does as advertised. Seems well built. Fit Jack properly. No idea how it will hold up over time and use.
by: Dave 01/07/2024
This what I needed for my trailer, more stable, also very fast shipping, and the commutation was awesome
by: Jerr C03/12/2017
Worked perfect to replace the missing jack foot on a vintage toy hauler. A little effort to redo the crushed tubular section & the new foot slipped right on. Thanks for the prompt service.
by: Buddy H11/04/2015
This is a great foot plate for 2" jacks. I would not put on a new jack without it. Shipping was prompt.
Buddy H.
11/3/2016
This is a great plate. It has held up well and continues to do a great job.
by: Rick 05/06/2024
Shipping was very fast and excellent pr oduct
by: Jerry12/04/2017
This foot pad gives me good clearance while towing it behind my SUV
Jerry
12/4/2018
So far, its still working great No problems with it
by: Curtis12/24/2018
My leveling jack broke on my camper/ice shanty as I was preparing for hard water to thicken. I remembered ordering parts from etrailer when I was building it 4+ years ago. My experience with you back then was excellent as it was this time. Thanks for the quick service and the great products.
- Curtis W.
by: Samuel07/25/2023
Arrived on time as promised. Order in conjunction with a new A frame side wind jack. Fit great and is very sturdy. Would use etrailer again.
by: James02/13/2024
Works well, but I take it off when trav eling.
by: Brenton 09/14/2023
Nice strong trailer Jack plate
by: Brent 03/29/2024
Quick service and dependable profession als
by: Dave D08/12/2013
Exactly what I was looking for. Perfect fit, easy to order, came in about a week. 3rd order from etrailer I'll be going back for all my needs in the future!!
by: Garret 07/10/2023
Used this for a swivel jack I modified for my square drop trailer.
by: Shawn C.04/21/2016
Awesome product! Well built, fit perfect. I needed to drill a couple holes in the foot to drain out any water because it will get trapped. No big deal! I would recommend this product to anyone that need one! Thanks etrailer
by: Wayne01/01/2024
Product was high quality, arrived quickly and worked well!
by: Jrzoffroad03/16/2024
Fits great and works great.
by: Anthony04/02/2020
Quality piece and a decent price. I never had a footplate before and I think this will well.
by: Jesse 12/23/2023
Am excellent product that will last and didn’t cost a lot.
by: Mark 08/04/2023
Better than expected, high quality, fast shipping, it’s trailer heaven!
by: Mark12/18/2023
Arrived on time as described
by: Sam10/12/2023
After a year doing its job well.
25
610
Show More Reviews
See what our Experts say about this Pro Series Accessories and Parts
- What are the Dimensions of the Outer and inner Tubing of Trailer Jack # PS1401000303I went out to the warehouse to measure the Pro Series Round, A-Frame Jack, # PS1401000303. The outer tube is 2-1/4 inches in diameter. The inner tubing is about 1.97 inches in diameter. This jack does not come with a wheel or footplate. For a wheel, you can use # PS1400750340. For a foot plate, you can use # PS1400700340.
view full answer...
- Replacement Wheel Jack Or Foot Compatible With Custom Welded Furrel With 2-1/2 Inch DiameterWe don't have anything that fits the outside of that furrel, but if the inside diameter is 2 inches, then the e Pro Series Detachable Footplate w/ Pin for 2" Diameter Jacks - 2,000 lbs to 5,000 lbs # PS1400700340 will work. With either option you will need a longer pin because you will be using the jack leg's outer diameter.
view full answer...
- Trailer Jack Option for Trailer with 1-3/4 inch Hole for Jack Leg to FitAll of the sidewind jacks like the part # PSRV20000103 will have an outer diameter of 2 or 2-1/4 inches. This one happens to be 2-1/4 inches. You would have to open up the lower hole to match the correct size of the larger jack. A qualified fabricator in your area would have no problem doing this. This jack would work great for you as it has more than enough capacity. For a foot plate you would need part # PS1400700340 or a wheel caster # PS1400750340.
view full answer... - Distance from Plate to Pin Hole on Pro Series Detachable Footplate # PS1400700340I went out to the warehouse and was able to measure the distance from the base plate to the pin hole on the Pro Series Detachable Footplate # PS1400700340. The distance is right at 3/4 inches so you should have no problem using it with your existing jack as long as it also has 2 inch diameter tubing. I have included an image labeled with this dimension for you to review.
view full answer...
- Replacement Trailer Jack Recommendation for a 2005 Haulmark Transport 6X10 I looked up some pictures of your trailer and it looks like the style of jack that came on your trailer is an A-frame style jack like part # PSRV20000103. This would be a great jack to use as a replacement as it should replace what you currently have and has plenty of capacity. I feel confident recommending this jack because of how many positive reviews it has as well. You may also be interested in a wheel caster part # PS1400750340 but should note that it would reduce the capacity of...
view full answer... - Can Detachable Pro Series Jack Foot PS1400700340 Be Left On When TowingAs long as you retract the jack tube far enough that the detachable foot Pro Series Jack part # PS1400700340 would not contact the ground you could leave it on.
view full answer... - Height of Buyers Products A-Frame Jack # 3370091265 without HandleI went out to our warehouse to take a look at the Buyers Products A-Frame Jack # 3370091265 referenced in your question. I measured a height from the mounting bracket up to the top of the tube (before the handle) of just about 9-1/2 inches. I have attached an image to assist. To get the clearance measurement you're needing you likely will need to move down to a 2,000 pound topwind jack (if possible for your trailer's tongue weight). For this I recommend taking a look at the Pro Series...
view full answer...
- Length of Pro Series 2K A-Frame Trailer Jack from Mounting Bracket to Bottom and Pin Hole DiameterOn the Pro Series Round, A-Frame Trailer Jack, # PSEA20000103, it measures 8 inches from the mounting bracket to the bottom of the inner tube. For the footplate, # PS1400700340, or the Wheel, # PS1400750340, (both fit this jack) the pin diameter is 5/16 of an inch and the length is 2-3/4 inches. The slotted holes on the mounting bracket measure 7/16 inches wide by 7/8 inches long. They are 3 inches apart on center.
view full answer... - Will Bulldog A-Frame Jack # BD1550101344 Fit 2,000-Lb Boat and Trailer and Be Corrosion-ResistantThe Bulldog Round Sidewind A-Frame Jack, part # BD1550101344, has a lift capacity of 3,000 lbs and will work fine on your 2,000-lb boat and trailer for lift capacity. The lift capacity means this jack is able to lift and support up to 3,000 lbs. An A-frame jack like the Bulldog is mounted on the tongue of the trailer so it is rated to lift the tongue weight of the boat and trailer. If you have a 2,000-lb boat and trailer, the tongue weight range would be 10 to 15 percent or 200 to 300...
view full answer... - Tire Cover and Jack Recommendation for a USA Brand Horse TrailerIn order to pick out the correct tire cover we need to know what the overall diameter of your tire is. First thing you will need to do is get the tire size off the side of your trailer tire. Once you have that check out the link I attached that details how to determine trailer tire diameter. Once you have that check out the link I attached that will take you to all the different tire covers we offer. You will want to select your tire diameter range from the dimensions facet on the left...
view full answer... - Footplate Recommendation to Replace Wheel Caster on Trailer Tongue JackThe Pro Series Footplate, part # PS1400700340, is a great choice for a replacement footplate on your trailer jack. The footplate features a snapper pin so no additional clip is needed to secure the foot. I've linked a video for you to take a look at.
view full answer... - Removing Caster of Bulldog Rack-and-Gear Jack # BD162300According to Bulldog, the caster wheel of the # BD162300 could theoretically be removed, but it is not recommended. If the bolt holding the caster is removed, and the caster is slid off the tube of the jack, there are washers and ball bearings that will fall out of the bottom of the jack that will be very difficult to replace. This jack was not designed to have the caster removed and replaced with a foot plate. The Pro Series # PS1401000303 might be a good option. From the mounting bracket...
view full answer... - Which Wheel Fits the Pro Series A-Frame 2,000 Pound Trailer Jack # PSRV20000103The correct wheel for the Pro Series A-Frame Trailer Jack # PSRV20000103 that you referenced is # PS1400750340. With the wheel on the capacity of the jack will be limited to 1,200 pounds. We also have a foot that will fit should you need one, # PS1400700340. The capacity will stay at 2,000 pounds when using the foot.
view full answer... - Is Footplate from Shelby 5793 Jack Compatible with Pro Series Round, A-Frame Jack # PSEA20000340Footplates for trailer jacks tend to be universal so I would be surprised if the one from your Shelby wasn't compatible with the Pro Series Round, A-Frame Jack # PSEA20000340 that you referenced. The Pro Series Detachable Footplate # PS1400700340 that was made to go with this jack has the standard 1/4" pin so if the footplate from your Shelby has a 1/4" pin and has a tubing diameter of 2" on the jack itself then you can most certainly use your old footplate with the Pro Series jack.
view full answer... - Fulton F2 Swing-Up Jack for a T@B TAB Tear Trailer with a 1.5I think the Fulton F2 Swing-Up Jack is a good choice. The model for 4 - 5" frames is # F1413140334. The 1600 lb. tongue weight rating is much more than you need, but won't affect the function of the jack. The height will work and it will get the jack level with the tongue when traveling. My only concern would be that you have enough space on your frame for the jack to swing up. You will need approximately 25" of frame space that is free from other accessories to allow the jack to swing...
view full answer...
- Low Clearance A-Frame Trailer Jack that Can be Fitted with a Wheel or FootplateThe footplate for Bulldog rack and gear jack # BD018520 is welded to the foot and cannot be removed but I do have some recommendations for you. First, take a look at Pro Series jack # PS1401000303. The mounting bracket is very low relative to the bottom of the jack tubes, 5-1/2 inches. You can use footplate, # PS1400700340 and wheel # PS1400750340. The wheel is rated for 1,200 pounds so it would limit the jack capacity to 1,200 pounds also. And we also have Bulldog jack # BD155033 with...
view full answer... - What is Meant by 15-Inches of Travel for Pro Series Round A-Frame Jack PS1401000303Pro Series Round A-Frame Jack # PS1401000303 does offer 15-inches of travel (or lift) and this is simply the difference between the fully retracted and fully extended lengths. This jack can lift up to 2000-lbs and if you like you can add a caster wheel like # PS1400750340 which drops the jack rating to 1200-lbs or a standard foot plate # PS1400700340 which lets you keep the full 2K capacity. You could even take a look at the Fastway Flip Automatic Fold-Up Jack Foot for 2-1/4" Jacks -...
view full answer... - Recommended Top Wind A-Frame Trailer JackThe mounting bracket we sell for the Bulldog Round Jack, part # BD150000, you mentioned is not the weld on style triangular bracket you asked about. It is the Mount Tube for Bulldog Round Jack, part # BDPG9810-00. This attaches to the outer tube of the jack and has a round mount with a pin to secure it into place. I may have another option for you. I recommend the Pro Series Round A-Frame Jack, part # PS1400600303. This jack has a 5,000 lb lift capacity and has the triangular plate already...
view full answer... - Is an Extendable Foot Available for Pro Series Round Topwind A-Frame Jack # PS1400600303We do offer a foot plate for the referenced Pro Series Round Topwind A-Frame Jack # PS1400600303. The jack does not include any foot plate or wheel but both are available. I have linked a video on this Pro Series item. The foot plate is part # PS1400700340 and it includes the pin to secure it to the inner tube of the jack. We also offer a caster wheel attachment rated at 1200-lbs, part # PS1400750340, which also includes the pin to secure it to the inner tube of the jack. Note that both...
view full answer... - Method to Support Tongue of Rented 6 x 12 Enclosed Trailer for Temporary StorageIf there is no tongue jack installed on the 6 x 12 enclosed A-frame trailer you are renting you can certainly install one to allow safe storage while the trailer is uncoupled from your tow vehicle. A cinder block or stacked lumber are commonly used for stationary long-term storage applications but a safer route is to install a tongue jack such as # PSEA20000103 and mount to it either a caster # PS1400750340 which will allow you to maneouver the trailer for hitching it to your vehicle, or...
view full answer... - Recommended A-Frame Trailer Jack for Bottom Mount Trailer ApplicationFor your trailer jack, I recommend Bulldog A-Frame Jack - 5,000 lbs - Top Wind # BD175000 which will be an easier installation than a sidewind option on your trailer based on the photos. If you prefer the sidewind style, it can absolutely still be used. For this, I recommend the Round A-Frame Trailer Jack - Sidewind - 15-5/8" Travel - 5,000 lbs # TJA-5000S-B. The installation of a sidewind will require disassembling the jack because the gearbox wouldn't otherwise clear the installation...
view full answer...
- A-Frame Jack Recommendation for Travel Trailer with Propane Tank Right Behind JackAs far as the Ultimate Trailer Jack # 322-RDJ-2K goes the design, and more specifically the placement of the pin, is placed close to the mounting point of the jack because that is where the jack is most stable. As far as I know they are not yet making one that would work out well for your travel trailer. Your best option is a different jack that doesn't stick down so far below the trailer frame. Bulldog 3K jack # BD1550101344 is one option. Without a footplate on it measures 7 inches from...
view full answer...
- Is a Base or Wheel Needed when Ordering the Pro Series Round A-Frame JackThe Pro Series Round, A-Frame Jack - Topwind - 14 inch Lift - 2,000 lbs, item # PSEA20000103, does not come with a footplate base, item # PS1400700340, or a wheel, item # PS1400750340, so that you can determine the best option for your setup and purchase accordingly. You would need to order a footplate if you park your trailer in a stationary position and do not need to move the trailer when not hooked to a vehicle. If you need to be able to move your trailer when it is not attached to...
view full answer... - Replacement A-Frame Jack for Forest River A-Frame Pop Up Trailer 17I pulled up pictures of your Forest River A-Frame pop up trailer 17 and it has a very standard a-frame jack on it that we can easily help you replace. The trailer does seem to have a very low ground clearance so that would be the most important feature to accommodate. Take a look at Pro Series jack # PS1401000303. The mounting bracket is very low relative to the bottom of the jack tubes, 5-1/2 inches. You can use footplate, # PS1400700340 and wheel # PS1400750340. The wheel is rated for...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Jameson C
Video by:
Jacob T
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Matthew E
Video Edited:
Dustin K
Installed by:
Randy B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Jerr C.
3/12/2018
I appreciate the follow up. Your products continue to provide greatservice and give me nothing but pleasure whenever I use my vintage Pentontoy hauler. Thanks again.